Keim Supplementary Products

Keim Concretal-Repair-Mortar (alt. Keim Concretal-Mortar 25lb)
Non-shrinking cementitious mortar for repairing of large concrete surfaces, layer thickness of approx. 5 mm to max 50 mm (in several layers).

Keim Concretal-Filler
Concrete repair finishing mortar suitable for cracks, blow holes etc., frost and de-icing salt resistant. Layer thickness 1 mm to max 5 mm.

Keim Concretal-Fine-Finishing-Mortar
For repairing of defective concrete surfaces (cracks, pipes, holes, etc.) and restored surfaces for a layer thickness of approx. 0.5 mm to max. 2 mm in one layer, total layer thickness max 4 mm

Keim Concretal-Modifier
Additive to the mixing water of Keim Concretal-Fine-Finishing-Mortar for the preparation of a blow hole slurry.

Keim Concrete-Cleaner
Cleaning concentrate to remove contamination and mold release agents from concrete surfaces.

Keim Bio-Stripper
Stripping agent for removal of film forming coatings. Biodegradable and without chlorinated hydrocarbon.

Keim Algicid
Non-acid algicide against fungus and algae to be applied on mineral substrates.

Keim Lime-Remover
Lime remover for the removal of sinter layers or as a cleaning agent for contaminated surfaces. 1 liter Keim Lime-Remover must be diluted with 3 litres of water.

Keim Universal Render
Lime-cement render, fiber reinforced, for localized repairs and/or full rendering.

Keim Glass Fiber Reinforcing Mesh
Glass fiber mesh, to be embedded in Keim Universal Render