You are here
Heavy Duty Steel Column Forms (Rental)
Related Products
Call customer service for a quote!
- Prices are for minimum 28 day lease per full round section
Deslauriers Heavy Duty Steel Column forms develop an exceptionally smooth, hard surface remarkably free of voids and with a minimum number of indistinct seams. The forms are galvanized constant radius steel half round sections and quarter round sections (for forms over 48" in diameter) bolted into units for crane handling on the jobsite.
Vertical and horizontal seams, opened and closed with each pour, are connected with high speed bolts to speed setting and stripping. Curing time permitting, one column per form can be produced each working day.
All standard column diameters from 14" to 60" in 8'-0, 4'-0, 2'-0, and 1'-0 lengths are stocked and available for immediate shipment. You can eliminate form inventory and keep working capital available by leasing Deslauriers Heavy Duty forms only when needed.
Lateral pressure should not exceed 3000 PSF on forms through 36" diameter or 2000 PSF on forms over 36" diameter.
Built-in 1-1/2" lifting holes on most 4ft and 8ft forms. Lifting design of 4000 pound per hole or 8000 pounds assembled. Deslauriers recommends using lifting spreader bar for lifting all column forms.
For Purchase or for Rentals of 3 months or longer, known at inception of order - contact customer service for discount and invoicing arrangements.
Example: cat# HD2496
first two digits= form diameter... 24" dia
second two digits= form height.....96 " or 8ft
RETURN ADDRESS
1601 Frontenac Road
Naperville, IL 60563